Elica Gas Stove Service Center in Hyderabad

Black soot forms when gas burns without enough air. Clogged brass burner holes or dust inside the mixing tube restrict oxygen flow. Technicians de-carbonize the burner and re-align the air shutter to restore a clean blue flame.

Yes. Piped Natural Gas operates at 20 mbar pressure compared to LPG's 30 mbar. Our technicians replace the brass nozzle orifices with precision PNG-calibrated jets, realign air shutters, and perform digital gas-leak checks.

Cooking oil and food spills seep past the knob collar into the brass spindle valve, baking into hardened gum over time. We dismantle the gas cock, clear out hardened grease, and apply high-temperature silicone valve grease.

Common causes include a dead D-battery under the chassis, corroded battery terminal springs, dampness around the spark pin from recent washing, or a cracked ceramic electrode grounding against the chassis.

No. Toughened glass panels are held under internal tensile stress. Any edge chip or hairline crack significantly compromises structural integrity and can shatter suddenly when exposed to high cooking temperatures. The glass panel should be replaced.

Immediately turn off the main cylinder regulator or PNG valve. Open kitchen windows for ventilation. Do NOT operate any electric switches, exhaust fans, or mobile phones near the cooktop. Call for prompt technician inspection.

Standard gas leak detection and valve replacement typically cost between ₹450 and ₹850, including inspection and replacement of rubber gaskets or manifold seals.

Yes. We install high-grade forged brass burners that withstand intense thermal cycling and maintain corrosion resistance compared to cheap aluminum imitations.

Yes. We specialize in post-warranty care and older models, sourcing verified compatible parts when manufacturer warranty support is no longer accessible.

Standard nozzle clearing and burner calibration take 30 to 45 minutes. A complete valve re-greasing or PNG conversion takes approximately 45 to 60 minutes.